Sim2 HT3000 Instalační manuál stáhnout pdf (Strana 12)

HT3000 HOST

ENGLISH

9 ON SCREEN MENU

All system functions can be operated from the keypad or

remote control, with the aid of a complete, user-friendly on

screen menu.

INPUTS

The input selection menu is opened by pressing 0 on the

remote control or with the SOURCE key on the projector or

HOST system keypads.

To select an input, scroll through the list with the ▲ and ▼

keys until the required input is highlighted, then press ▶.

Input selection menu display terminates if you press the ESC

key or when the On-Screen Menu display timeout interval

(set in the Setup Menu) has elapsed or after the signal has

been recognised.

Some inputs can receive RGB and YCrCb signals. The input

and type of signal (RGB or YPrPB) are set in the pull down

menu that is displayed to the right of the symbol < when

you press the key.

After selecting the signal that arrives from the source (using

the ▲ and ▼ keys), press MENU+/MENU- to conﬁrm and

exit the pull-down menu; to the right of the < symbol, you

will see the setting you have just entered.

During the short time that it takes to ﬁnd the signal, a box

will appear showing the signal requested. Additional infor-

mation regarding the signal such as the video standard (for

video signals) or deﬁnition (for graphic signals), the aspect

and the current user memory can be displayed by pressing

the number key on the remote control corresponding to the

selected source.

In the SETUP menu you can select whether or not to display

this information; for further information see SOURCE INFOR-

MATION in the MENU section.

Information on the selected menu can be shown on the front

display of the Host system by pressing the INFO key.

MAIN MENU

Press the MENU key on the keypad or the MENU+ or MENU-

key on the remote control to access the main menu of the On

Screen Display. The main menu is divided into four windows,

PICTURE, IMAGE, SETUP and MENU, in which the various

adjustments are grouped according to the frequency of use.

Use the ▲ and ▼ keys to select the line corresponding to

the adjustment you wish to make.

The various menus offer only adjustments corresponding to

the type of input signal displayed (e.g. certain typical adjust-

ments for video signals, not necessary for graphic signals, do

not appear on the menus for the latter, and vice versa).

Some adjustments (e.g. Brightness and Contrast) are as-

sociated with a numerical value that can be modiﬁed within

the set limits using the ◀ and ▶ keys.

For others (e.g. CINEMA MODE) you can choose between

two options offered on the same line and selectable using

the ◀ and ▶ keys.

1 VIDEO 1

2 VIDEO 2

3 S-VIDEO 1

4 S-VIDEO 2

5 COMPONENT 1

6 COMPONENT 2

7 COMPONENT 3

: 1 VIDEO 1

: 2 VIDEO 2

: 3 S-VIDEO 1

: 4 S-VIDEO 2

: 5 COMPONENT 1

: 6 COMPONENT 2

: 7 COMPONENT 3

Source List 1/3

COMPONENT 4

GRAPHICS 1

GRAPHICS 2

DVI

HDMI 1

HDMI 2

HDMI 3

: 8 COMPONENT

: 9 GRAPHICS RGB

: 10 GRAPHICS RGB

: 11 DVI

: 12 HDMI 1

: 13 HDMI 2

: 14 HDMI 3

Source List 2/3

HDMI 4

HDMI 5

HDMI 6

SDI

: 15 HDMI 4

: 16 HDMI 5

: 17 HDMI 6

: 18 SDI

Souce List 3/3

Source:

Resolution:

V: 50 Hz

Aspect:

Gamma:

Color Temp:

Brightness:

Contrast:

HDMI 1

1080p50

H: 56.2 MHz

Anamorphic

EN1

D50

Picture

Contrast

Color

Tint

Sharpness

Filter

Cinema Mode

Off Auto

Auto

Noise Reduction

Brightness

inglese (ht3000host).indd 11 19-05-2008 18:08:55

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 28 29

Komentáře k této Příručce

Žádné komentáře

Sim2 HT3000 Instalační manuál Strana 12

Komentáře k této Příručce

Související produkty a manuály pro Datové projektory Sim2 HT3000