Sim2 HT 280E Instalační manuál

460711000HT380.<<< user and installation manualDownloaded From projector-manual.com Sim2 Manuals

10To activate an electric motorised screen a 12 Volt output is provided at the rear of the projector (Fig. 10).The output is activated (Voltage:

115 SWITCHING THE PROJECTOR ON AND OFFWARNING: Connect the projector to a power supply with a nominal voltage within the following values: 110-240 V

12SWITCHING OFF AND RETURNING TO STANDBYWith the remote control: press .With the keypad: press .When switching off, the projector goes into stand-b

13HT380 - Connection panel 31245Television receiverDVD playerVCRVideocameraVideo game consoleTelevision receiverHDTV receiverDVD playerVCRVideo game c

14of the pictures reproduced by the D80 in the two cases: the deinterlacing performed by the HT380 is often more effective than that performed by the

15RS232 INTERFACE CONNECTOR The projector can be controlled from a PC: simply hookup the interface connector to a PC’s RS232 serial cable.Do not pla

16MAIN MENUTo access the main menu of the On Screen Display press the MENU key on the keypad or the MENU+ or MENU- key on the remote control

17To access these submenus, press the <, mentre l’uscita ed il ritorno al livello superiore avviene con la pressione dei tasti MENU+/- key. Press

18NORMAL: projects the image occupying the full height of the screen while maintaining the aspect ratio of the input signal. When the input signal asp

19GAMMA CORRECTIONDetermines the system’s response to the grey scale, empha-sising or attenuating the different grades of brightness (blacks, dark, me

2Sets the unit to stand-by.Activates the On Screen Display menus and allows navigation though the various pages.▲,▼,◀,▶Navigates between the On Screen

20SIM2 (EN) and Graphics (GR), User. The Standard curve has been defined for general use, and is set for videocameras, digital cameras, and for viewin

21TEST PATTERNSDisplays a series of five test patterns, which are useful when installing the system and checking basic functions. Use the ◀ and ▶ k

22same key as before. Use the ▲ key to switch from upper case to lower case characters. Cancel errors with ▼ once you have selected the character in q

23making a total of 24 different available Memories.The image parameters that can be saved/recalled by the Memories management system are the

24Save memoryTo save the image parameter current values in memory 1, move the cursor to line ‘1’ with the ▼ and ▲ ‚ keys and open the pull-down menu b

25INFODisplays the current status of the projector and information concerning the projected video/graphic signal. This function is displayed o

2611 TROUBLESHOOTING GUIDENo power (LEDs always OFF)• Check that the units’ power switches are set to I.• Check that the power cables are correct

27You can purchase the following optional accessories at your Dealer: - CEILING MOUNT KIT A range of lenses are available from our dealers t

28ELECTRONICSInput signals:  •COMPOSITEVIDEO(CVBS) gold plated RCA connectors 1,0 Vpp/75Ω,negativesynchronisation •1S

29DIMENSIONS74 352 174 102 318 Downloaded From projector-manual.com Sim2 Manuals

3Different input signal resolutions can be adapted to match the specified screen resolution without loss of image quality, thanks to a generous select

30Min projection distance16/9 2,3 90” 2,7 107” 3,2 126” 3,6 144” 4,1 162” 4,6 180” 5,0 198” 5,5 215” 6,8 2

•Inaccordancewiththemanufacturer’sconstantproductdevelopmentprogramme,productspecificationsanddesignaresubjecttochangeswithoutnotic

4CAUTIONTo reduce the risk of electric shock, disconnect the power supply cable on the rear panel before removing the top cover of the projector.For t

5FCC STATEMENTCLASS B PRODUCTNote: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 1

6• Read this manual carefully and keep it in a safe place for future consultation. This manual contains important information on how to inst

7• Changing the fuses. Before changing the fuse disconnect the unit from the mains power supply. The fuse compartment is next to the power supply

83 UNPACKINGTo remove the HT380 system from its carton follow the diagrams (Fig. 4).Keep the carton for use when transporting or shipping the unit.Fi

9Position the projector on a stable, suitable platform or utilise the optional bracket for a fixed ceiling installation.ATTENTION: In case of floor mo