Sim2 C3X Lumis Instalační manuál stáhnout pdf (Strana 10)

C3X Lumis

AIR OUTLET

AIR INLET

20 cm (7,87 inches)

It is possible to use a hideaway motorized screen. The ac-

tivation switch can be provided using output

TRIG1

(+12V)

located on the back of the projector.

This output is activated (voltage +12 V DC) when you turn

the projector on. It is de-activated (no output voltage) when

the projector is in standby status.

You can also use black motorized hideaway curtains to

mark off the projection screen

when you change the format

of the projected image. The activation command can be

provided using output TRIG2

located on the back of the

projector

For rear installations, a suitable translucid screen must be

used. For front installations, it is advisable to use a screen

with non-reﬂective black edges that perfectly ﬁt the pro-

jected image.

You should use screen with unity gain. Directional screens

with high gain may be used effectively only for small groups

of spectators located at the centre of the screen.

Do not allow room lighting to shine directly onto the screen

during projection. This would reduce the contrast image.

Keep the projection screen away from furniture or other ob-

jects with reﬂective surfaces, or light-coloured walls.

It is possible to install an anamorphic lens in the frontal part

of the projector. The lens control commands of the anamor-

phic lens can be found at the

TRIG3

output located at the

back of the projector.

1 2 3

!! CAUTION:

For all information and data relative to assembly and use

of the anamorphic lens, we recommend referral to the

documentation supplied and attached with the lens.

PROJECTOR VENTILATION

The lamp inside the projector generates a great deal of heat,

so a continuous air ﬂow is needed in order to keep the pro-

jector operating efﬁciently.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 30 31

Komentáře k této Příručce

Žádné komentáře

Sim2 C3X Lumis Instalační manuál Strana 10

Komentáře k této Příručce

Související produkty a manuály pro Datové projektory Sim2 C3X Lumis